图片名称

Jiangsu Youpu Biochemical Technology Co., Ltd. Annual Environmental Monitoring Plan


Release time:

2019-05-21

2019 Jiangsu Youpu Biochemical Technology Co., Ltd

Monitoring the implementation of the plan

According to the provisions of Su Huanban [2014] No. 25 "Jiangsu Province Chemical Park Environmental Protection System Construction Specification (Trial)", combined with the requirements of the environmental management and monitoring chapter in the company's environmental impact assessment report, this plan is formulated.

1. Wastewater monitoring

1. Monitoring point: self-built sewage treatment device inlet, aerobic pool, anaerobic pool and tail water pool.

2. Monitoring items: pH, CODcr, ammonia nitrogen, salinity, chloride, BOD5, total phosphorus, suspended solids, toluene, fluoride, aniline, total copper, petroleum, chlorobenzene.

3. Monitoring frequency: once a quarter.

 

2. Exhaust gas monitoring

1. Organized emissions

serial number

Row number

Drain location

Monitoring factors

1

  FQ-234201

RTO incinerators

Sulfur dioxide, nitrogen oxides, ethanol, dichloroethane, toluene, particulate matter, VOC, odor

2

  FQ-234202 

Adjacent to the top floor of p-chlorochlorination

Ammonia, HCl, hydrogen fluoride

Quarterly monitoring (3 times/cycle)

 

2. Fugitive gas emissions

(1) Set up a monitoring point in the downwind direction

(2) Monitoring items: ammonia, Cl<>, HCl, toluene, hydrogen fluoride, ethanol, dust, odor concentration

(3) Monitoring frequency: semi-annual monitoring (<> times/cycle)

 

3. Groundwater monitoring

1. Monitoring points: 4 measurement points are set up inside and outside the factory boundary

2. Monitoring items: pH, total hardness, chloride, sulfate, permanganate index, ammonia nitrogen, fluoride, total coliform, total number of bacteria, volatile phenols and hydrogen cyanide, ammonia nitrogen, cadmium, hexavalent chromium.

3. Monitoring frequency: measured every six months

 

4. Sound environment monitoring

1. Monitoring points: 8 measurement points are laid out in the factory boundary

2. Monitoring item: continuous equivalent sound level Leg(A).

3. Monitoring frequency: one day every six months, once a day and one night

 

5. Water quality monitoring of rainwater pipe network in the park

1. Monitoring point: CODcr online automatic monitor, ammonia nitrogen online automatic monitor.

2. Monitoring items: CODcr, ammonia nitrogen

3. Monitoring frequency: supervision and monitoring by a third-party organization (Tianze Environmental Protection).

 

6. Comparison supervision and monitoring of online automatic monitoring equipment for pollution sources

1. Monitoring point: CODcr online automatic monitor, ammonia nitrogen online automatic monitor.

2. Monitoring items: COD, ammonia nitrogen

3. Monitoring frequency: supervision and monitoring by a third-party organization (Tianze Environmental Protection).

 

7. Monitoring of soil environmental quality

1. Monitoring points: 3 measurement points inside and outside the factory boundary

2. Monitoring items: pH, arsenic, chromium, copper, nickel, zinc, lead, cadmium, mercury, toluene, fluoride, chlorobenzene, aniline.

3. Monitoring frequency: measured every six months

 

8. Standardized management of environmental monitoring

It shall be implemented in accordance with the relevant requirements of the "Standards for the Construction of Enterprise Laboratories in Coastal Economic Development Zones (Trial)".

 

2019 Mar 3